[Russell840]

Hi there
I have a Mitsubishi N60 , PC base Windows 95, on hartford1230A machin.
There is a H.D.D Problem , after weeks , work and study I can start up the Council System control , but my windows doesnt Know My NC - cart and I cant Find Driver Software , so my turning program has error, as I attached.
Can anyone Help me please?

[Russell840]

Well, The answer was:
1. Batery was dead ( What mounted on NC Card to keep data such as parameters, MDs , offsets, ... ) and most of data was losted
2.we need to reinstall win95 , and config Meldas magic64 NC Card as a new hardware
3. after installing autorun VB , we need to run HIM ( hiuman machine interface ) program and reload Meldas64s memory.

best regards
Russell

[Kashif]

Hello Friends

I need your help

I have a hartford machining center, whitch work with meldas magic64.

I need system floppys

Meldas magic64 nc system disk 1 and 2
Meldas magic utility disk 1 and 2
Meldas magic meldasmagic monitor disk 1
Meldas magic custom API library runtime disk 1 and 2
Meldas magic64 NC data 64m disk 1

Please help me
If u have these floppy's please send me a soft copy

My email. [email protected]
Thanks in advance

[Kashif]

Hello Friends

I need your help

I have a hartford machining center, whitch work with meldas magic64.

I need system floppys

Meldas magic64 nc system disk 1 and 2
Meldas magic utility disk 1 and 2
Meldas magic meldasmagic monitor disk 1
Meldas magic custom API library runtime disk 1 and 2
Meldas magic64 NC data 64m disk 1

Please help me
If u have these floppy's please send me a soft copy

My email. [email protected]
Thanks in advance

Mitsubishi Meldas Magic64 PC Based
System SoftWare Disk

AOMEI complete disk image

https://drive.google.com/drive/mobile/folders/1ENcGRNDRlsExITohcSXAEkZUd5pFOblP?usp=sharing