Hi All,

So I put in my new LCD screen and all was working well for a few months. Came in one morning to power up and I heard the coolant pump running. Shut it down and turned back on same. The screen was giving me a fault message but not the one to reference the axis. Pressed fault / status button and nothing. Turned off and back on then screen went dead no fans or anything. Disconnected the coolant pump, nothing changed. Removed power supply and had a buddy trouble shoot. Turns out that one leg of the 3 phase blew a fuse. Put power supply back in powered up a now I get fans and a screen but no drivers. It seems as if the it is rebooting itself real fast over and over.

any thoughts?

Thanks much