I summarised the retrofit of my MAHO MH400E in video here:
https://www.youtube.com/watch?v=LXwbRhgq1og
The Github wiki describes the gearbox control module a friend programmed for me:
https://github.com/jin-eld/mh400e-linuxcnc/wiki
Mark
I summarised the retrofit of my MAHO MH400E in video here:
https://www.youtube.com/watch?v=LXwbRhgq1og
The Github wiki describes the gearbox control module a friend programmed for me:
https://github.com/jin-eld/mh400e-linuxcnc/wiki
Mark
Regards,
Mark
Great job!