Hello everyone
Iam bulilding a new machine,Cutting Size 4 x 4 foot.
Materials is Mostly in square tubbing scheddule 2.5mm, 50 x 50 mm and 25 x 50mm
Gantry's weight is near 100 pounds includind wires and router
V wheels over 19 mm angle rails
I will use 2 steppers in Y axis
Screws will be 1/2 x 10TPI 5 Starts with antibackslash nuts
Materials to cut will be, soft plastic, acrilic plastic, and soft wood.
Do you think that I can use this machine with
420 in/oz bipolar steppers and a 36 volts Kelling drivers?
Sorry my bad english
Thanks for your help
Kind Regards
Rene