Good day.
I have old milling machine Leadwell 1300D with fanuc OM model A (1987).
I lost the parameters and macro programs. I found only old parameters ( that not original, but machine worked) and rewrite them.
Now I can:
- send machine in home position,
- use drilling cycle (with one tool)))
- In MDI i can change the tool use manual code
M9
M19
M21(RIGHT)
M26(UNCLAPM)
M24(DOWN)
M11(MAGAZIN CW M12-CCW)
M23(UP)
M25(CLAMP)
M22(LEFT)
So it's work ok...
But M6T() in MDI doesn't work and make error 1039 TOOL NO. > 20 !!!
In auto mode i can't change the tools.
I can't understand how is working ATC. I don't found macro program for tool changing and don't found parameters that call sup program ( i mean #230-239 =6 calls pr. 9020-9029 #240-242=6 pr.9001-9003 #6080-6089=6 pr.-9020-9029)
Number of my parameters
#100-219
#500-599
#700-779
#900-919
#1000-1128
#2000-2128
#3000-3128
#9000-9008
#9700-9899
Not a lot.
From my point of view machine don't used macro program for tool changing. Because absent parameter that connected with macro program.
If machine don't used macro program for ATC, how it works?? Ladder (logic) ? Why error?
May some one help me?