[_Aphex_]

Hi all.

Can anyone recommend a good programmer to create a post for me? And if so, any idea of cost?

I am using Mastercam V9.1, and need to communicate with a TNC 145C control using a .pst processor file.

I can provide sample programs of what I would like to acheive, along with samples of the programs that my current post creates.

Would this be enough information? Any help is greatly appreciated.

Thanks in advance.

Chris.

[kuman]

i can do a post for you...give me an example , a file .mcx and the cnc code you would like to have in output

[bozboyle]

Did you get help

[postguy]

Hi all.

Can anyone recommend a good programmer to create a post for me? And if so, any idea of cost?

I am using Mastercam V9.1, and need to communicate with a TNC 145C control using a .pst processor file.

I can provide sample programs of what I would like to acheive, along with samples of the programs that my current post creates.

Would this be enough information? Any help is greatly appreciated.

Thanks in advance.

Chris.

I got good POST from here