509,697 active members
2,799 visitors online
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > driver A06B-6079-H105 terminating cinnector
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2008
    Posts
    13

    driver A06B-6079-H105 terminating cinnector

    Hi good day,

    I was removing the connectors of 20 pins of these drivers A06B-6079-H105 and i lost the terminating connector.

    I guess this take a few bridges, i can see the datasheet and conection of conectors JX1B a JX1A, the bridge is the connector JX1B.

    But i no find that pin jumper, Some of you have this information?

    regards
    Renato Masias

  2. #2
    Registered
    Join Date
    Apr 2011
    Posts
    509

    Re: driver A06B-6079-H105 terminating cinnector

    Short pin 5 and 6

  3. #3
    Member
    Join Date
    Mar 2008
    Posts
    13

    Re: driver A06B-6079-H105 terminating cinnector

    Thanks for the data.

    I have three connector air, and four connectors in the A06B, these are:

    JX5
    JX1A
    JX1B
    PWM11_JV1B,

    the connector terminating is connected a JX1B, the other a JV1B and the third i remenber seeing in the JX5, but according a manual these is in JX1A, then JX5 can be free?

    Also i try change the battery, these driver have a compartment af battery but is empty, I no can locate the battery, these is possible be in same encoder?


    regards
    Renato Masias

  4. #4
    Registered
    Join Date
    Apr 2011
    Posts
    509

    Re: driver A06B-6079-H105 terminating cinnector

    Only the JX1B needs to be terminated. It satisfies the alarm loop. As far as the battery goes it is an option for the absolute encoder. Check parameter 1815 and if the APC bit (Bit 5 xx1xxxxx) is off then you don't need the battery.

Similar Threads

  1. Replies: 0
    Last Post: 12-08-2013, 09:32 PM
  2. Alpha Series Servo Amplifier A06B-6079-H106
    By M.RISHIKESH in forum Fanuc
    Replies: 0
    Last Post: 11-25-2009, 04:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •