584,849 active members*
3,889 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Uncategorised CAD Discussion > geomagic design sketch tolerance
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2016
    Posts
    18

    geomagic design sketch tolerance

    how do i adjust the decimal point to which geomagic design displays dimensions in the 2d sketch. only shows to the nearest .001 i would like it to show to .0001. admitedly its more of my own ocd peeping out but i want to see .3125 or .0625 not .313 or .063. i believe i can adjust that in the drawings fairly straight foreward but i cant quit figure out the sketch

  2. #2
    Join Date
    Apr 2004
    Posts
    5728

    Re: geomagic design sketch tolerance

    Go into the Dimension Properties window and set the precision to 4 instead of 3. (See Geomagic Design - 2D Documentation )
    Andrew Werby
    Website

Similar Threads

  1. Can Geomagic do design tables and configurations
    By CosmosK in forum Uncategorised CAD Discussion
    Replies: 1
    Last Post: 06-09-2015, 10:56 PM
  2. Geomagic design elements assemblies, movement in a slot
    By rocketboy604 in forum Uncategorised CAD Discussion
    Replies: 6
    Last Post: 03-20-2015, 02:13 AM
  3. Geomagic import reference sketch?
    By Stevos758 in forum Uncategorised CAD Discussion
    Replies: 3
    Last Post: 10-31-2014, 06:03 PM
  4. Geomagic Design discounts?
    By Bertho in forum Uncategorised CAD Discussion
    Replies: 5
    Last Post: 12-20-2013, 02:25 AM
  5. There is no one in Geomagic design support
    By L98FIERO in forum Uncategorised CAD Discussion
    Replies: 7
    Last Post: 08-16-2013, 02:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •