Originally Posted by
windom46
Hi everyone, I'm new to the forum and very poor with English.
I am attaching the required manual and pose a problem on my 4030 4 CNC axes. After changing some settings not working longer and I had to reset to factory settings.
Then i set D001 and D176 to 1.
After i set D000, D002, D003, D009, D021, D93 to 400.
D31, D36, D39 to 1 and finally D001 to 0 for the parameter block
Now the spindle manually control works well on PC but when I switch the spindle starts, but always at 24000 rpm even though I Gcode imposed more low values (eg. M03 S4000 should run at 4000 rpm).
If anyone has suggestions or other values to change would do me a great gift.
I hope I have sent you the PDF manual, thanks