I have a 6040 CNC with the VFD and control box as shown in the attached photo. (mine has PRT-E1500W written above the LED display).
Can anyone tell me what the program settings are for this VSD?
I can't get the spindle to spin and I'm hoping that I may have accidently altered on of the settings.
The codes are selected as a 'd000' type entry ('d' followed by 3 numerals) and then the number can be changed for that code.

Here is what I have copied down from my VSD:
VFD settings


d000 = 50.0
d001 = 0
d002 = 000
d003 = 00.00
d004 = 220.00
d005 = 00.0
d006 = 110.00
d007 = 00.50
d008 = 001.7
d009 = 00.00
d010 = 00.10
d011 to d018 = 10.00
d019 = 01.00
d020 = 10.00
d021 = 50.00
d022 = 0
d023 to d030 = 0000
d031 = 004
d032 = 001
d033 to d036 = 0
d037 = 004
d038 = 001
d039 = 000
d040 = 100.0
d041 to d043 = 0
d044 = 030.0
d045 = 030
d046 to d050 = 0