584,860 active members*
5,252 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2016
    Posts
    2

    Rich Auto controller issues

    Hello everyone,

    I have a RchAuto controller that upon power up stops loading at 80%. Can anybody help with what the problem may be? I have tried a new cable and that doesn't seem to be a problem. Also tried powering up several time. That didn't work either.

    Thank you for all suggestions in advance.

  2. #2
    Join Date
    Jul 2013
    Posts
    3

    Re: Rich Auto controller issues

    It is probably encountering a corrupt line of code. I have a Richauto A11E and it suddenly started only getting to 46% when loading and then hanging.... A firmware update fixed that, but you will need to know all the parameters for your machine because you will be spending some time in "menu" setting them. You can get a complete list from you manufacturer....(mine was Laguna). You have to set all the settings in machine setup like the pulse equivalent, etc.(different for every brand of cnc)

    Hope this helps. Make sure you talk to your manufacturer before you do anything though....

Similar Threads

  1. Z Axis auto zero plate wiring on usb motion controller
    By phongshader in forum Chinese Machines
    Replies: 3
    Last Post: 11-10-2017, 02:01 AM
  2. Replies: 25
    Last Post: 04-24-2015, 03:56 AM
  3. Taig controller off, Auto zero still detected
    By TaigCNCer in forum Community Club House
    Replies: 0
    Last Post: 07-12-2013, 06:52 PM
  4. Replies: 0
    Last Post: 06-08-2011, 02:36 PM
  5. Auto-Off a problem with the Xbox 360-Wireless-Controller?
    By Spartan117 in forum Mach Wizards, Macros, & Addons
    Replies: 0
    Last Post: 08-07-2009, 07:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •