[A_Camera]

For those who use UCCNC and are not member of the CNC Drive forum or missed the release:

http://www.cncdrive.com/UCCNC/setup_1.2026.exe

The changes/bug fixes list:

- On startup first time if MDI was entered with the Enter key it did not accept the typed in command, fixed.
- If the Toolpath view was in focus then the Enter key did not access the MDI, fixed.
- Softlimits issue after homing fixed.
- Screeneditor was missing the Add Codeview button, button was added.
- Adding new Toolpath view in screen editor had a bug and caused an exception, fixed.
- The M10/M11 commands had a problem when in some cases the commands were optimised out and accidentally removed in CV mode, fixed.
- The exec.Wait function was not precise, had a problem, fixed.

I have not installed it so I have no other information to share than this.

[ger21]

Just be aware that these are "test" releases.
When CNC Drive feels that all the bugs have been ironed out, they'll post a new release on their website.

[A_Camera]

Just be aware that these are "test" releases.
When CNC Drive feels that all the bugs have been ironed out, they'll post a new release on their website.

Yes. It is for "testing" and is for whoever is interested or bothered by bugs and need the fixes, but it is on their website, just not under the UCCNC product page.

[robertspark]

I posted 1.2023 (I think it was) on this website when it was a bug fix ... thinking I was being helpful.

What I did not realize is cncdrive post it on the forum first and in reply to the relevant people who found or listed the bug..... in the hope that they will test and verify that the bug has been removed... what happened with 1.2023 was that the bug was not removed and was only resolved in the 1.2024 release a few days later after another attempt (as it could not be replicated on their machines / setup).

Hence after that I decided not to post anything on here until it was officially released by cncdrive on the website with the change log as listed here...
forum.cncdrive.com ? View forum - UCCNC Change Log

However that being said the person that reported the limits bug in version 1.2022 has said that 1.2025 has cleared it....
forum.cncdrive.com ? View topic - broken soft limit in 1.2022

But it is probably something you want to be weary of letting everyone know there is a new release when it may not fix the bug originally reported which requires some user testing.

[ger21]

I have no problem with posting it, just make sure you point out that it's a test version.

I've tested this version and the MDI bugs have indeed been fixed. (I reported them). Not sure about the others...

[A_Camera]

I have no problem with posting it, just make sure you point out that it's a test version.

That's why the tread title is "UCCNC version 1.2026 is ready for download and testing"

Feel free to delete the thread if you think we should not use this forum for such information.

[ger21]

No, I didn't say that. And I guess I missed the title.
Just pointing out that it's a test version.

[A_Camera]

It is now officially released as well.

CNCdrive - motion controls