Hi all,

Please help us to connect properly a MAHO MH600 W with the PC

Until now we has connected the machine by TNC Server program of TNC CRemo, but the problem is that we cannot send larger programs to the machine. We suppose the program should be transmited
part by part "blockweis" so transmit 1 part - machine working, then transmit second part - machine working and so on.
Please inform us also how to check the machines parameters. Our manual is in German language, please if somebody has manuals in English for this machine, let us know or send by mail. [email protected]

Thank you in advance
Best Regards,
Valentin