584,817 active members*
4,660 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > DIY CNC Router Table Machines > Import vise- Kurt soft jaws will not work
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2012
    Posts
    266

    Import vise- Kurt soft jaws will not work

    Good morning!

    Well I have an import twin lock double lock 6 inch vise that I would like to make some soft jaws for. Originally I thought I could order the Kurt jaws and bolt them on but they are off!

    I'm looking for a good set of dimensions. On mine from bottom to center of bolt is about 1.00 rough eyeball with my calipers. Across the centers I'm about 3.91

    Anyone else run into this?


    Sent from my SM-N910V using Tapatalk

  2. #2
    Join Date
    Jan 2007
    Posts
    599

    Re: Import vise- Kurt soft jaws will not work

    Maybe you should try measuring in MM, as you said "import vise" 25 x 100 sounds like a pretty close measurement....

  3. #3
    Join Date
    Jun 2012
    Posts
    266

    Re: Import vise- Kurt soft jaws will not work

    I will measure in mm tonight. Was just hoping someone had a blueprint etc for exact specs

    Sent from my SM-N910V using Tapatalk

Similar Threads

  1. Replies: 0
    Last Post: 03-05-2016, 11:38 PM
  2. Master jaws for soft jaws (B2227L lathe)
    By GreatNorthGnome in forum Mini Lathe
    Replies: 2
    Last Post: 01-11-2016, 07:05 PM
  3. How does a Kurt Vice / Vise work?
    By andypugh in forum Work Fixtures / Hold-Down Solutions
    Replies: 1
    Last Post: 08-21-2010, 12:22 AM
  4. Soft jaws for the Tormach vise?
    By zephyr9900 in forum Tormach Personal CNC Mill
    Replies: 9
    Last Post: 10-29-2007, 06:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •