Originally Posted by
Bordaco
Hello to all,
I'm finishing my retrofit proyect on a Kondia B1000 cnc, we just pickup the Kflop + Kanalog combo for this project because the analog card, very helpful,
The machine is running very fast and accurate, like a new toy, but I have a little problem with the G28:
In the MDI line command at Kmotion CNC screen, I just type "G28" hit enter and the X Y and Z move together to machine home position.
My previous experience with Fanuc controls, in G28 command to finish the work, I always specified the axis to move like:
G28 Z0.
G28 X0. Y0.
So first clear the Z axis from the part, an then the other axis, and some times when me table is to big to wait the movement, i skip the G28 on X and Y axis.
And most of the CAM software trows separate commands to home the axis.
Any suggestions on how to change 28 behavior, or I missing someting here.
Thanks.
Boris Borda