Hello to all!
Does anybody have instructions how to set G7 kinematik on DMU 50 EVO maschine mit millplus controller.
Regards
janko
Hello to all!
Does anybody have instructions how to set G7 kinematik on DMU 50 EVO maschine mit millplus controller.
Regards
janko
I have the info for my machine 2000 DMU50V Millplus 4.0 that i got from DMG. Its kind of a pain to setup especially if you dont have recent certification paperwork for your machine. It works though.
Your email? Thx Mark
Hi Mark!
Can you send me on [email protected]
Hi Mark! cooud you send me this instruction , we having problem with this adjustments--- no real papework for it, thanks mail is : [email protected]
Can you send it me please [email protected]
hi,
can you send me on mail [email protected]
thanks a lot..
i have some instruction from dmg but it doesnt working.
after we made kinematics, in manual mode operation everything is ok. and we can rotate all axis and machine working everything in 2 or 3 cent of mm..
but
when we made a program with postprocessors we have deviation position spindle per height, depth, width..deviation is not the same for axis.
we think that after transport we must adjust something else, but we don't know what and we dont know how. ..
do you have any ideas for our problem..maybe cycles is problem..or maybe machining axis after transport..and do you have maybe documentation for this..
i would really appreciate the help..
Hello, Please could you help with that kinematic model? My address: [email protected]. Thank you