[dbunyip]

What options are out there for brushed dc servo drives for bigger motors? Was looking at vipers but they don't work with analog inputs. Looking for something to use on a fanuc 10m servo

Sent from my SM-N920P using Tapatalk

[cnckeith]

hello. Centroid has the AC/DC drive in 30 amp and 60 amp versions that will run big DC servo motors. found about halfway down this page. CENTROID CNC controller technology for AC and DC servo motor based Machine Tools look for the fanuc section.

[Al_The_Man]

A-M-C Advanced Motion, also has large DC drives, also Most BLDC drives will drive a DC brushed motor with no problem.
Al.

[Russell840]

Hi dear anventurs
I have a lathe cnc machine with Fanuc 21 system control. When i bouth the machine , its need a double fanuc servo drive for X-axis and Turret.
I bought a new 5.6A type : A068-6096-H203 .
after instaling rhe power and encoder and other cable , the control display " Its need to update new servo drive motor, " But
unfourtunately for me, I dont know hw?
Could you help me please.

thanks

Russell

[Russell840]

Finally I solve the problem )
its plesure to me , answer or help any same probglem .
warm regards
Russell