586,005 active members*
5,077 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > how use G1 code without spindle rotation FANUC OTD lathe

Thread: how use G1 code without spindle rotation FANUC OTD lathe

Results 1 to 4 of 4
  1. 11-08-2016, 12:11 PM #1
    Sylwester1
    Sylwester1 is offline Registered
    Join Date
    Jun 2016
    Posts
    17

    how use G1 code without spindle rotation FANUC OTD lathe

    warmly welcome
    Machine lathe on FANUC OTD
    I have to use handle for rod. but when am using G1 code without spindle rotation
    the machine not move. I use this program:

    M10 chuck clamp
    M19 spindle orient
    M11 chuck unclamp
    G1 Z 50.0 F200.0

    where i can change parameter for this operation?
    I try to chcange 24#2 SCTO not checked speed arrival signal, but no results

    please help me
    Reply With Quote Reply With Quote
  2. 11-08-2016, 12:41 PM #2
    Superman
    Superman is online now Flies Fast
    Join Date
    Dec 2008
    Posts
    3109

    Re: how use G1 code without spindle rotation FANUC OTD lathe

    Lathes are normally set for feed per REV ( G99 )...... this means spindle MUST be turning for anything to feed

    Try setting feed per MINUTE ( G98 )

    Verify the correct codes with your manual
    Reply With Quote Reply With Quote
  3. 11-08-2016, 01:27 PM #3
    Sylwester1
    Sylwester1 is offline Registered
    Join Date
    Jun 2016
    Posts
    17

    Re: how use G1 code without spindle rotation FANUC OTD lathe

    I checked G98 codes and not working
    Reply With Quote Reply With Quote
  4. 11-08-2016, 04:35 PM #4
    PEGBOARD
    PEGBOARD is offline Junior Member
    Join Date
    May 2016
    Posts
    30

    Re: how use G1 code without spindle rotation FANUC OTD lathe

    Try This
    the chuck must be clamped or it will never work
    G97M5
    M19
    G97S0M3
    G98
    G1Z50.F200.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. using G68 rotation code
    By steve pies in forum Haas Mills
    Replies: 4
    Last Post: 06-26-2017, 03:14 PM
  2. "EX1160 spindle rotation down alarm Fanuc series oi-md
    By offsak in forum Fanuc
    Replies: 1
    Last Post: 10-30-2014, 01:10 AM
  3. Coordinate rotation on fanuc lathe
    By vincent.pomerleau in forum Fanuc
    Replies: 0
    Last Post: 06-16-2014, 02:01 PM
  4. Fanuc 11M spindle rotation is backwards
    By ddcarter in forum Fanuc
    Replies: 2
    Last Post: 03-28-2012, 02:14 PM
  5. fanuc 11 lathe g-code
    By bobcor in forum Fanuc
    Replies: 3
    Last Post: 08-20-2006, 08:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules