A customer uses a Haas Micron VCE1250,

The chip conveyor of this machine is original switched on and off through a board. This part of the board is burned, so the chip conveyor is not working at all.
The local electrician cuts all wires, and after this, he didn't understand anymore, and ran away, leaving me with the problem.

So I made an ordinary switch on the machine: left/stop/right with a few relais.
Now I want to hook up the motor, but run to an unexpected problem.
This motor is a made by General Electric, 5KCP20L G8353 T CL B INSUL
The assembly is from Bison Gear Motor: Modell 016-500-9115
Out of this motor comes 5 wires:
Blue
White
black
red
brown
There is also a capacitor.


I have tried everything to clarify the connection of this gear motor.

I`ve contacted Bison USA and got the information from Canada. Its a motor for Haas. This is located in Belgium.

The representation in Germany could not say anything. They give the question to Belgium.

Belgium wants to give no information to me !

Any help would be highly appreciated.

Thanks in advange and greetings from The Netherlands!
Attachment 338842