[KB2WYL]

Hello guys. First off thank you all for creating and keeping these forums. It is so nice to be able to search for CNC forums and find these so quickly. I am going to go look and see what forum I should post in. I have a chance to buy a 40x60 (total) table that is supposed to be all but ready to go, and would love some advice on what y'all think. Thanks so much again,

Loren

[KB2WYL]

Oh, ha, and I should introduce myself. I live in Ferndale, CA. Been hobby woodworking for years. Also design and build Tube Amplifiers (hifi). I've recently been taking welding classes up at the local CC. I've been wanting to get into CNC for years, and hopefully, this will be my chance to do so :-) Thanks again,

Loren

[KOC62]

Welcome to the forum. Many posts here that you can read to see what others have done, and are doing.
Regarding your request for advice is difficult as you didn't provide any info to advise on. If the unit meets your objectives, including your budget then it may be for you to buy it.
I've only done some home-building of a small mdf cnc, thus have limited experience with cnc.