584,858 active members*
4,632 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > DynaTorch > Dynatorch XLS - Sheetcam Post Processing file
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2013
    Posts
    20

    Dynatorch XLS - Sheetcam Post Processing file

    Does anyone have the Post Processing file for Sheetcam that successfully produces a scribing/marking file as well as a cutting code?
    Many thanks...

  2. #2
    Join Date
    Oct 2013
    Posts
    20

    Re: Dynatorch XLS - Sheetcam Post Processing file

    Solved. Learned the code and wrote it myself.

Similar Threads

  1. GOOD TECHNICAL SUPPORT WITH DYNATORCH
    By WSS in forum DynaTorch
    Replies: 8
    Last Post: 11-12-2016, 02:16 AM
  2. HAAS Spindles are HORRIBLE!!
    By zsinclair in forum Haas Mills
    Replies: 81
    Last Post: 04-23-2015, 04:59 AM
  3. Horrible surface finish from endmill
    By skray775 in forum MetalWork Discussion
    Replies: 11
    Last Post: 11-03-2012, 05:42 AM
  4. My Horrible Experience w/ NOVAKON
    By speedfreeks in forum Novakon
    Replies: 11
    Last Post: 05-08-2012, 06:55 PM
  5. X2 Breaking Bits and Horrible Cuts
    By webgeek in forum Benchtop Machines
    Replies: 22
    Last Post: 04-01-2010, 02:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •