Hi

I need some help with my Maho mill. I`m having some problem with running the axis for reference search, when I try to run axis the software shows feed but nothing moves. I have replaced one of the IO cards, but that only helped with making the hydraulics’ stay on. It doesn’t show any error codes, and all the rest of the software seems to be working correct (As far as I know).
When I try the A axis I can hear the clamp release and nothing more happens. The only thing I have been able to control is the tool magazine belt.
The controller is Phillips 432.
I would be grateful if there are some tricks to help find out what the problem is.
Sorry if the English aren’t so good, I`m not good at writing in English