584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2016
    Posts
    5

    Mitsubishi FX20 contact problem

    We have 1997 Mitsubishi FX20 wire machine which we inherited about a year ago. It worked fine for a while but since about 5-6 months it started to show a contact with the IP settings of 4 and up. It works fine with smaller power settings. Initially that was happening only once in a while, now it seems to be working correctly only once in a while. I checked pretty much everything for any broken wires, so that is out of question. Beside that it would show the contact constantly not just on higher power settings. Did anybody experience something like that? Any suggestions what could be wrong?

    Thanks,
    Pete

  2. #2
    Join Date
    Feb 2009
    Posts
    51

    Re: Mitsubishi FX20 contact problem

    On top of the generator is a cover covering fans and some load resistors, check the resistance of the 2off 4ohm resistors, they are wired in series so should read approximately 8ohms. Sometimes we see 1 of these resistors go open circuit.

  3. #3
    Join Date
    Nov 2016
    Posts
    5

    Re: Mitsubishi FX20 contact problem

    Thanks for the reply.
    I checked them and they seem to be fine.

  4. #4
    Join Date
    Feb 2009
    Posts
    51

    Re: Mitsubishi FX20 contact problem

    Check the 6 avr's on the back of the sub unit.

  5. #5
    Join Date
    Feb 2009
    Posts
    51

    Re: Mitsubishi FX20 contact problem

    Is your machine a straight FX machine or is it a FX20K machine?

  6. #6
    We hace a FX-20, Shows contact anda have that red led in MW416, This happens when we want to start to Cut. Someone know what happens?

Similar Threads

  1. Mitsubishi FX20 EDM - X-Axis
    By jtmueller10 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 08-04-2014, 03:08 PM
  2. Mitsubishi FX20 Chiller issue
    By EDoucette32 in forum EDM Discussion General Topics
    Replies: 3
    Last Post: 07-30-2013, 12:50 PM
  3. mitsubishi FX20 software
    By eroprel in forum EDM Discussion General Topics
    Replies: 3
    Last Post: 01-23-2013, 02:21 PM
  4. Mitsubishi Wire EDM SX10 Contact problem
    By m_ross18 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 05-01-2011, 05:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •