[TOOL-MAN]

Thanks in Advance for the help.
Hoping someone can help. We have a Daewoo Puma 2000SY with a Fanuc 18i control. The machine was bumped and as a result the X & Y axes were knocked off position. I have been trying the procedure of indicating to a boring sleeve, moving to home position and toggeling parameter 1815 APZ as well as APC & APZ with no luck. The Machine Position and Relative Position screens change but the machine does not physically change position. I also have tried changing the Grid Shift 1850. If someone has a proven procedure to correct my problem it would be greatly appreciated.

Thanks Jimmy

[dhardt]

Thanks in Advance for the help.
Hoping someone can help. We have a Daewoo Puma 2000SY with a Fanuc 18i control. The machine was bumped and as a result the X & Y axes were knocked off position. I have been trying the procedure of indicating to a boring sleeve, moving to home position and toggeling parameter 1815 APZ as well as APC & APZ with no luck. The Machine Position and Relative Position screens change but the machine does not physically change position. I also have tried changing the Grid Shift 1850. If someone has a proven procedure to correct my problem it would be greatly appreciated.

Thanks Jimmy

If what you say is true, something else is going on. Call my cell number 973 803-9479

I work for Doosan. (Daewoo)