585,956 active members*
4,332 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > Hyundai Hit 20, Siemens 840d bios battery
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2013
    Posts
    67

    Hyundai Hit 20, Siemens 840d bios battery

    I have an 840 d control that needs its bios battery changed every 30 days. This just seems wrong. Does anyone have any thoughts on this?
    What should the approximate life of this battery be. What could be wrong here.

    Any input would be appreciated.

  2. #2
    Join Date
    Feb 2009
    Posts
    6028

    Re: Hyundai Hit 20, Siemens 840d bios battery

    5 or so years for the battery, that little round lithium should last at least that long. I ended up soldering in a 2/3A holder with the lithium on ours, so I don't have to go through all the work. If yours is dying in a month, either you are getting old stock batteries or your MB has an issue.

    Sent from my A3-A20FHD using Tapatalk

  3. #3
    Join Date
    Nov 2013
    Posts
    67

    Re: Hyundai Hit 20, Siemens 840d bios battery

    I agree, my other machines batteries last at least 5 years as well.
    I just purchased the machine and they sent me instructions on how to change the batteries after the purchase before I even had it powered up! Not good. I hope they've just been using poor batteries. I've sent away for the Siemens recommended batteries. I'll see whats going on then.
    Thanks for your input. I hope I don't need to be looking for an electronic problem.

Similar Threads

  1. A2100 BIOS Battery Replacement
    By flyinphill in forum Cincinnati CNC
    Replies: 12
    Last Post: 01-13-2019, 09:39 AM
  2. Help needed Hyundai hit 8 with Siemens 840
    By jamienw in forum Hyundai Kia
    Replies: 1
    Last Post: 06-18-2016, 02:46 AM
  3. hyundai hit 8s 840c battery location?
    By cdfracing in forum Hyundai Kia
    Replies: 1
    Last Post: 10-22-2012, 11:27 PM
  4. anilam 1100 Bios battery low
    By boatman321 in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 02-08-2011, 10:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •