584,829 active members*
4,890 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Dyna Mechtronics > My DYNA-MYTE 3000 Revamping
Page 2 of 3 123
Results 21 to 40 of 56
  1. #21
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    Thanks Big Chips, this interface will make the retrofit of an original dm3000 an easy thing to do :wave::cheers:

  2. #22

    Re: My DYNA-MYTE 3000 Revamping

    Very well done Turbina !!!

  3. #23
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    New user manual release

  4. #24
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    The interfaces are exhausted, for next month I will do other 5

    New User manual released
    Attached Files Attached Files

  5. #25
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    The interfaces are availables

  6. #26
    Quote Originally Posted by turbina View Post
    The interfaces are availables
    I'm interested in one of your conversion boxes. Please let me know how I can purchase one of these. Thanks.

  7. #27
    Join Date
    Jul 2012
    Posts
    2
    I am interested in your conversion box. Where can I buy one?

  8. #28
    Join Date
    Jul 2012
    Posts
    2
    Quote Originally Posted by turbina View Post
    The interfaces are availables
    Turbina. When I PM you I get a notice that " Your inbox is full". Can you P.M. me your contact info, like phone, and email?

  9. #29
    Join Date
    Oct 2006
    Posts
    1

    Hi Turbina,

    How can I order one of your interfaces?

  10. #30
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    I'll contact you through PM for details

  11. #31
    Join Date
    May 2019
    Posts
    1

    Re: My DYNA-MYTE 3000 Revamping

    Hello! How I can purchase one box? Can you please PM me? Thanks

  12. #32
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    VRReels It does not seem that you have private messages enabled, enable them or contact me via email

  13. #33
    Join Date
    Nov 2019
    Posts
    3

    Smile Re: My DYNA-MYTE 3000 Revamping

    The EZ DM3000 'kit' is FANTASTIC. I have zero CNC experience. I came across a new un-used 1999 DM3000 at a school district sale. Did some web searching and came across Big Chips review of Turbina's box and programming files. Installed Mach3, replaced files with Turbina's files, and the lathe is fully operational with Mach3. The DM3000 is a great addition to my personal race car restoration hobby. AND Turbina's Tool Changer Macro works great too. With no prior experience, I can cut, paste and chain several Mach wizards together, and after deleting redundant code and setting up tool offsets, I have made parts using 4 tools without any stoppage. Having fun too.
    Only thing missing is a source for boring bar holders and inserts. a bar feeder would be nice too.

  14. #34
    Join Date
    Nov 2009
    Posts
    4415

    Re: My DYNA-MYTE 3000 Revamping

    Is the tool changer bidirectional as it was originally? I havent seen anyone disengage the pawl and spin the other way. Most if not all macros I have seen over rotate and then back up against the stop. There is nothing wrong with it I am just curious. Unfortunately I bastardized mine before Turbina came along ;-)
    A lazy man does it twice.

  15. #35
    Join Date
    May 2004
    Posts
    22

    Re: My DYNA-MYTE 3000 Revamping

    Do you still have the Dyna 3000 kits for sale, Thanks Dan

  16. #36
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    Yes, kit is available

  17. #37
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    Quote Originally Posted by Fastest1 View Post
    Is the tool changer bidirectional as it was originally?....
    Initially I wanted to do it bi-directionally but to avoid a possible rotation error I concentrated on the clockwise rotation only, now years later since I never make errors I will also add the anti-clockwise rotation, I still have to test it for an adequate period that is free from errors.

    I also found that by activating the "Tool Selections Persistent" checkbox in General Config, mach3 keeps the last selected tool in memory even with the machine off and I recommend it.

  18. #38
    Join Date
    Nov 2009
    Posts
    4415

    Re: My DYNA-MYTE 3000 Revamping

    Quote Originally Posted by turbina View Post
    Initially I wanted to do it bi-directionally but to avoid a possible rotation error I concentrated on the clockwise rotation only, now years later since I never make errors I will also add the anti-clockwise rotation, I still have to test it for an adequate period that is free from errors.

    I also found that by activating the "Tool Selections Persistent" checkbox in General Config, mach3 keeps the last selected tool in memory even with the machine off and I recommend it.
    Turbina, thanks for the reply and good work for those who can use it.
    I no longer use Mach but would enjoy seeing anyone implement the bidirectional macro as we know it must work.
    I have seen a few people fix and adapt the DM3000 very well but no one has shown a bidirectional tool change.



    Sent from my iPhone using Tapatalk Pro
    A lazy man does it twice.

  19. #39
    Join Date
    May 2004
    Posts
    22

    Re: My DYNA-MYTE 3000 Revamping

    Thanks, were can I get more information on it and were to order

  20. #40
    Join Date
    Apr 2006
    Posts
    40

    Re: My DYNA-MYTE 3000 Revamping

    I'll contact you through PM for details

Page 2 of 3 123

Similar Threads

  1. dyna myte 3000
    By go0869 in forum Dyna Mechtronics
    Replies: 1
    Last Post: 10-04-2014, 08:16 PM
  2. WTB Dyna Myte 3000
    By Big Chips in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 09-14-2014, 06:10 PM
  3. DYNA MYTE 3000
    By SUE143 in forum Dyna Mechtronics
    Replies: 2
    Last Post: 04-09-2012, 06:00 PM
  4. DYNA MECHTRONICS DYNA MYTE 3000 AND 2800 WANTED!!!
    By britcollector in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 02-23-2010, 04:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •