584,846 active members*
4,601 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2013
    Posts
    9

    Mikron VCP600-HS

    Hello guys,
    I got a used milling Mikron VCP600-HS.
    It was out of order for some time now.
    My problems are: bad spindle bearings and i can not control-on the machine (it stays in emergency stop state and gives no other alarms).
    I checked the machine circuit and took the spindle out of the machine to see for details.
    But i got into another problem: i do not have any electrical diagram of the machine nor the spindle mechanical drawing. And from my opinion both are needed to fix the machine else i am stuck.
    So i would like to ask if any one here could share a copy of electrical diagram or spindle drawing?
    I would really appreciate your help.
    Below is my machine version:

    Machine: VCP 600-HS
    Control: TNC 430 Heidenhain
    6500kg
    3 Phase 400V 50Hz 40A 20kVa
    Control circuit voltage: 24V
    Schema No: 212.30.73.2x0
    Serial No.: 107.30.98.296
    Sound level: 75dB
    Model: 2001
    Validity: CN 30.0101.01

  2. #2
    Join Date
    Dec 2013
    Posts
    9
    bump. please check and help me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •