585,690 active members*
4,535 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Chinese Machines > 118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

Thread: 118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

Results 1 to 4 of 4
  1. 11-26-2016, 08:46 AM #1
    danaman
    danaman is offline Registered
    Join Date
    Jan 2016
    Posts
    33

    118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

    https://www.youtube.com/watch?v=J__5FTApye8

    118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!!!!

    Pushing my 2.2kw Chinese CNC Router to its Limits!
    Reply With Quote Reply With Quote
  2. 11-26-2016, 04:51 PM #2
    CitizenOfDreams
    CitizenOfDreams is offline Member
    Join Date
    Nov 2012
    Posts
    1267

    Re: 118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

    Nice looking chips, but it's called "millimeters", not "em-ems". :wave:
    Reply With Quote Reply With Quote
  3. 11-27-2016, 02:13 AM #3
    danaman
    danaman is offline Registered
    Join Date
    Jan 2016
    Posts
    33

    Re: 118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

    Here it is milling out a job at 118inches per minute(3000 mm/min) with a 1/4 endmill 4 flutes!
    1.5mm depth of cut radial & 6mm depth of cut axial.

    https://www.youtube.com/watch?v=h07gqObN9o0
    Reply With Quote Reply With Quote
  4. 11-27-2016, 04:43 AM #4
    danaman
    danaman is offline Registered
    Join Date
    Jan 2016
    Posts
    33

    Re: 118 INCHES PER MINUTE MILLING ALUMINUM! MMR 5.9 CUBIC INCHES!

    Some finish & accuracy tests.
    Attached Thumbnails Attached Thumbnails 15179152_10157900470995249_5195909039080765943_n.jpg   15181312_10157900473695249_1295480320073556668_n.jpg   15253489_10157900473550249_79741085726176216_n.jpg   15178197_10157900473480249_2202093817226440967_n.jpg  

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Durabar G2 would involve 160 cubic inches removed ....is it practical ?
    By DLawrence in forum Tormach Personal CNC Mill
    Replies: 6
    Last Post: 06-25-2015, 11:16 PM
  2. What is IPM (inches per minute)?
    By Vard in forum Mechanical Calculations/Engineering Design
    Replies: 2
    Last Post: 08-30-2011, 04:27 PM
  3. inches per minute
    By planescott in forum Mach Software (ArtSoft software)
    Replies: 7
    Last Post: 02-25-2006, 01:29 AM
  4. Inches / Minute in Aluminum
    By rcazwillis in forum MetalWork Discussion
    Replies: 7
    Last Post: 04-07-2005, 01:15 AM
  5. Facemilling: 300 cubic inches per minute
    By Rekd in forum Community Club House
    Replies: 1
    Last Post: 02-11-2005, 05:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules