[SIHACENE]

hello
For long Time my machine still power OFF ,so loss all parameter , it's equiped with Sinumerik 810T Hope can find any one here who have same machine to send me if it's posible the files to transfert it TEA, TEA2 PCP and PCA files .
thank u in Advansed

[cnc_swe]

Have you found any how help you with the file yet?

[SIHACENE]

hello
thank u , I contact EMCO Europe and they send me all files of the machine.

[cnc_swe]

It was good because without the right content in the files start the machine in an edit mode and I / O to communicate with RS232. You must now handle the 5011 and 5013.
This file is specific of the setting parameters to communicate via RS232.
Example. RTS/CTS, 7 data bits, 2 stop bits, No parity, Baudrate 9600. (I can´t use higher than 1200 baud in my weary data card

5011: 1100 0111 -------------
5013: 1100 0111 -------------

Many values in these files are machine-specific.
I have a lot of older computer to earn and support my machine in the store and they usually do not tell before they go to sleep forever.
I use file-cloud, NAS, backup, and so on, but each time there was something I missed, of course.

I have print out all important information paper old folders. Just the files you have searched me in text format if it ever becomes. I have one mill and two lathe as use Siemens Sinumerik 810/840.
And then to set the parameters to work in the machine is another thing but it can be found on the Siemens website.
That´s all.

[ELVIR2ING]

hello
For long Time my machine still power OFF ,so loss all parameter , it's equiped with Sinumerik 810T Hope can find any one here who have same machine to send me if it's posible the files to transfert it TEA, TEA2 PCP and PCA files .
thank u in Advansed

Dear All,
?
can you help us solve the following problem:?
?
We have an Emcoturn 360 lathe.?
?
We need a backup. The machine system has fallen.?
?
?
Thank you in advance.

[Fire_in_the_hole]

Hi ELVIR2ING
I have some Siemens 810/840 machine and ofcourse I have the file to Sinumerik but your machine it is an Emco and not an original Sinumerik.
send me an email and you will get original parameters and if they fit then everything is well. Otherwise you can write to Emco in Austria or better to those who sell Emco in your country.

Why don't you have copies of these super important files. I have mine in all possible storage places like: Floppy, CD, HD, USB, QNAP and in the cloud.
You may have a burglary or even worse a fire. Think before not afterwards.