Re: Leetro Mpc6525 dll version
Hi.
Normally that problem is caused by electrical problems in the machine that end up damaging the controller. We recommend you check if it is properly grounded. Not only the machine from its external terminal, but also each component, controller, power supply, etc.
If you are very lucky unloading the residual current the controller can work again.
I leave a link to a software used to recover the leetro controllers:
Leetro Recover
Greetings and good luck!
German Rothar
BuchiCNC USA
You can check our CO2 laser cutters here:
CO2 Laser cutting machines
If you want a metal laser engraver:
Laser metal engravers
Great CNC Router:
CNC Routers
Soy tecnico de laser con experiencia.<br />Usuario de maquina de corte laser Buchicnc EVO 14.<br />Usuario de grabadora laser por fibra EVO 5.<br />Usuario de router CNC, con mesa de 3 x 2 mts Auto Tool Changer<br />Diseño mis propios archivos maquinas de corte laser con CorelDraw, LaserCut 5.3, RDWorks V8.<br /><a href="https://buchicnc.com" target="_blank">Estas son mis maquinas de corte láser BuchiCNC</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-14/" target="_blank">EVO 14</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-5/" target="_blank">EVO 5</a><br /><br /><a href="https://buchicnc.com/en/" target="_blank">Laser cutters & CNC Routers BuchiCNC USA</a><br /><a href="https://buchicnc.com/en/product/cnc-router-mr-atc-6-standard-line/" target="_blank">CNC Router ATC</a><br /><a href="https://buchicnc.com/en/product/laser-cutting-machine-evo-14/" target="_blank">EVO 14</a>