[chri5]

Hello Everybody,
I was able to buy a used LPKF 101 HI-P machine.
I want to run the machine with Win XP on a COM Port.
Sadly I did not get a communication link.
The controller is LPKF 101 HP with a 25 pins (female) port on the backside.
I tried different mappins between 25 pins and COM Port but no one work.

Maybe somebody have more information about the pin mapping and would like to share them with me?

I found another thread in this forum where another person stated that he has some mor informations - but I'm not allowed to send him a private message and his last activity was years ago.

Thanks in advance,
Chri5

[kevinhaddaway]

Hello Everybody,
I was able to buy a used LPKF 101 HI-P machine.
I want to run the machine with Win XP on a COM Port.
Sadly I did not get a communication link.
The controller is LPKF 101 HP with a 25 pins (female) port on the backside.
I tried different mappins between 25 pins and COM Port but no one work.

Maybe somebody have more information about the pin mapping and would like to share them with me?

I found another thread in this forum where another person stated that he has some mor informations - but I'm not allowed to send him a private message and his last activity was years ago.

Thanks in advance,
Chri5

hi I also have one of these machines i have a user manual for this that has the RS232 connections shown
i am currently looking for some of the tool changer collets for this machine.
regards
kevin