After seeing quite a few positive reviews of Omni, on Oct 20 (two months ago) I pulled the trigger on my order. It's a pretty basic machine, but will be a great addition to my shop. I already have another CNC mill that uses MACH3, so I went with that option to keep my tool-chain consistent. I've received several build updates so far but I'm still waiting on a video showing a complete but basic list of items. I'm anxious to get it shipped soon. I'll update this thread as the order progresses. -Zach
Machine type: OR 1325
X,Y,Z working area: 1300*2500*200mm
Spindle: 3kw watercooling spindle, 24,000RPM
Motor and drive: Stepper motor, Yako drives
Control system: Mach3 control system
Inverter: Fuling frequency inverter
Oil lubrication: manual lubrication system
Tool sensor: Manual tool calibration
Machine frame: T type Thickened steel gantry with steel square tubes frame
X, Y, Z structure: Rack and pinion drive, Taiwan Hiwin square rails, Taiwan TBI ballscrew
Software: Ucancam standard version(with dongle), Command language: G code
X, Y, Z Travelling Potioning Accuracy: ±0.02/300mm
X, Y, Z Travelling Repositioning Accuracy: ±0.02mm
Machine table: PVC combined Aluminum T -slot extrusion table(with water tank)
Working voltage: AC220V, 50Hz, single phase
20Cut tools,4Collets,8Clamps,2Spanners,Brush,Power Cord,4 machine feet, 2 water pumps
Emergency stop and Switch: Japan Omron emergency stop and SCHNEIDER switch
Packing : 3200*2150*1800mm( Free-fumigation wooden case), Gross weight: 1,650KGS