If someone who doesn't use Alphacam or the same machine as me were to send me the post for their machine could I load it into Alphacam and output one of my programs for them to use on their machine?
Sent from my iPhone using Tapatalk
Results 1 to 3 of 3
-
12-21-2016, 02:29 PM #1
Registered
- Join Date
- Aug 2014
- Posts
- 19
Outputting for someone else's machine
-
12-21-2016, 02:36 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Outputting for someone else's machine
Yes, but your tool table needs to match if he has an ATC.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
02-08-2017, 04:44 PM #3
Registered
- Join Date
- Apr 2016
- Posts
- 9
Re: Outputting for someone else's machine
you can ask them to send you their tool library
Reply With QuoteSimilar Threads
-
huanyang vfd not outputting voltage
By homerswitch in forum Spindles / VFDReplies: 0Last Post: 11-11-2016, 01:12 AM -
Outputting File
By Todd Zuercher in forum FanucReplies: 4Last Post: 04-12-2010, 02:00 PM -
outputting height offsets
By ebalistreri in forum DNC Problems and SolutionsReplies: 1Last Post: 02-18-2010, 02:29 AM -
NX6 Probing and outputting
By i0wa in forum UG NXReplies: 0Last Post: 12-03-2009, 07:19 PM -
Outputting to USB or MDI
By pants in forum Haas MillsReplies: 2Last Post: 06-10-2008, 12:58 AM
Tags for this Thread
Posting Permissions
