584,833 active members*
5,387 visitors online*
Register for free
Login

Thread: Tool Turret

Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2011
    Posts
    9

    Tool Turret

    please, I need turret encoder with 12 positions with binary output 24 v DC.
    It is preferable to get it from EUCHNER ,I need the model which enable me to get outputs with Binary code for each tool as following :

    T1 1000
    T2 0100
    T3 1100
    T4 0010
    T5 1010
    T6 0110
    T7 1110
    T8 0001
    T9 1001
    T10 0101
    T11 1101
    T12 0011

    I hope that you can help me to get the model , specifications and connections .

    THANKS

  2. #2
    Join Date
    Mar 2004
    Posts
    1542

    Re: Tool Turret


  3. #3
    Join Date
    Sep 2011
    Posts
    9

    Re: Tool Turret

    Thank you for your reply.
    the required encoder has axial shaft.
    output format : absolute - parallel output with natural binary code with cable .

    12 positions not 12 bit (only 4 bits) .

Similar Threads

  1. Tool Turret
    By camaru in forum Surfcam
    Replies: 3
    Last Post: 06-03-2016, 05:48 PM
  2. Aligning turret on a Daewoo Puma 10, 12 tool turret
    By AirChunk in forum Daewoo/Doosan
    Replies: 2
    Last Post: 06-03-2016, 02:37 AM
  3. Automatic tool changer program for a 8 tool turret Diy lathe cnc
    By tessen in forum Dynomotion/Kflop/Kanalog
    Replies: 11
    Last Post: 01-04-2014, 05:05 AM
  4. New to the 24 tool turret
    By RBrandes in forum Haas Mills
    Replies: 2
    Last Post: 06-04-2013, 09:13 AM
  5. Tool Turret Fault Alarm on TL-1 with no Turret?
    By Edster in forum Haas Lathes
    Replies: 10
    Last Post: 02-08-2010, 03:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •