586,019 active members*
3,865 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Aspire > Part Location in Aspire

Thread: Part Location in Aspire

Results 1 to 2 of 2
  1. 12-26-2016, 03:34 PM #1
    Wisker
    Wisker is offline Registered
    Join Date
    Dec 2016
    Posts
    37

    Part Location in Aspire

    Hi all,
    I hope this is a simple question! I made several individual 2d parts in Sketchup and then exported the vectors into Aspire which i had the workspace size for 4x8 work area so i could arrange all parts to fit. Does Aspire create the location of the parts so the cnc will know where to cut or is the location set from the axis point in Sketchup?
    Thanks
    Reply With Quote Reply With Quote
  2. 12-26-2016, 05:43 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Part Location in Aspire

    The part location is exactly where they are shown in your material on the screen in Aspire.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. g50 for part location
    By Vexiant in forum G-Code Programing
    Replies: 5
    Last Post: 12-09-2014, 01:28 PM
  2. Aspire drilling tool path in STL part
    By maly-miller in forum Aspire
    Replies: 7
    Last Post: 02-21-2014, 11:14 PM
  3. Aspire and Cabinetmaking part 2
    By cabnet636 in forum Commercial CNC Wood Routers
    Replies: 12
    Last Post: 09-12-2009, 12:20 PM
  4. digitizing a part location
    By eloid in forum DIY CNC Router Table Machines
    Replies: 12
    Last Post: 04-23-2009, 06:05 PM
  5. part location
    By sk96_me45 in forum UG NX
    Replies: 2
    Last Post: 01-20-2009, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules