Re: Profile Rail Wood Frame Router, 25" x 37" x 6" working area
Originally Posted by
Biggs427
I prefer using single flute especially at the kind of RPM you're running. The chips get evacuated more and this helps keeps the temperature lower so the alu sticks less on the cutter.
This is when I cut alu that I find my rpm controller to be the most useful.
Thanks, I'll order a single flute end mill for my next aluminum attempt. I would like to also add an RPM controller when I get some time, or I may just end up buying a spindle/vfd at some point.
Jeremy
http://www.diycncdesign.com/