https://www.youtube.com/watch?v=4gUF9ffn7PM
- Effective working area 1300x3000mm
- Z axis 100mm
- 3KW water cooling spindle,24000 rpm ,4pcs
- 3.7kw Fuling inverter
- Japan YASKAWA 850W motor and 1KW driver
- Taiwan SYNTEC control system 6MB
- one saw can move ±90 degree
- HIWIN #25 linear square guide way for X,Y,Z axis
- Taiwan TBI ball screw for Z axis
- Vacuum suction ,X roller, and Y roller
- Oil Lubrication System
Results 1 to 1 of 1
-
12-28-2016, 10:31 AM #1
Member
- Join Date
- Nov 2011
- Posts
- 261
Video: Saw cut SIP panel, Drill on the SIP panel, and milling the groove
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------
Reply With QuoteSimilar Threads
-
copied a red oak raised panel profile to an mdf panel---good results
By woodman08 in forum Gorilla CNC MachinesReplies: 0Last Post: 02-03-2015, 03:28 AM -
DIY CNC Milling Machine Control Panel for EMC2
By gschoep in forum LinuxCNC (formerly EMC2)Replies: 5Last Post: 02-23-2011, 05:10 AM -
Mach3 Touch Panel - Video
By ozan in forum Screen Layouts, Post Processors & MiscReplies: 3Last Post: 11-29-2008, 11:28 PM -
milling square cutouts in a panel?
By PGale in forum MetalWork DiscussionReplies: 6Last Post: 05-12-2008, 05:24 PM -
Front panel milling dimensions
By chuck99z28 in forum MetalWork DiscussionReplies: 6Last Post: 01-07-2008, 11:49 PM
Tags for this Thread
Posting Permissions
