584,874 active members*
5,208 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2014
    Posts
    44

    Is Dan Mauch still around?

    Hey fellas,
    Had a issue with my cnc today for the first time in quite a while. For some reason it decided to plunge down about a mm while working the surface of the product. I had Dan Mauch do some work on my machine some years ago and he did a wonderful job. I know he recommended his stepper system. Just not sure if he is still around. I called the number listed on camtronics and it was out of service. Any help would be GREATLY appreciated. Thanks fellas!

  2. #2
    Join Date
    Jan 2014
    Posts
    44

    Re: Is Dan Mauch still around?

    Additionally... I use mach 3 and aspire software. Is there any smaller complete 110v machines you all would recommend? Or maybe a solution to the issue in having with mine. Thanks again!

  3. #3
    Join Date
    Apr 2004
    Posts
    5728

    Re: Is Dan Mauch still around?

    How about a Taig? If your projects fit in its work envelope, it's the best little mill in its price range, 110v, and made in the USA. We sell them for a discount off list. What's the issue you're having? Haven't heard from Dan for quite a while...
    Andrew Werby
    Website

  4. #4
    Join Date
    Mar 2003
    Posts
    35538

    Re: Is Dan Mauch still around?

    Dan still posts on the Mach3 Yahoo group.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  5. #5
    Join Date
    Jan 2011
    Posts
    129

    Re: Is Dan Mauch still around?

    Quote Originally Posted by Us ill View Post
    Hey fellas,
    Had a issue with my cnc today for the first time in quite a while. For some reason it decided to plunge down about a mm while working the surface of the product. I had Dan Mauch do some work on my machine some years ago and he did a wonderful job. I know he recommended his stepper system. Just not sure if he is still around. I called the number listed on camtronics and it was out of service. Any help would be GREATLY appreciated. Thanks fellas!
    Anyone have a good email address for Dan Mauch. Trying to contact him.
    thanks,
    Chuck

Similar Threads

  1. Puchased Dan Mauch's CNC for the Shoptask
    By gfull60 in forum Shopmaster/Shoptask
    Replies: 2
    Last Post: 10-22-2007, 08:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •