[csnowbar]

I have Alphacam 2016 R1. How can I go about coding my own add-in? I'm able to open AlphaEdit and access the VBA Editor via Utilities and manipulate the NC code in AlphaEdit but have been unsuccessful at manipulating open documents within Alphacam itself. I was under the impression creating a VBA project would give me the ability to create macros for the main Alphacam environment but now I'm thinking that might only be possible via an add-in. Any help with this would be greatly appreciated. Thanks in advance!

Craig

[holdlako]

Hi Craig,

I've wrote a couple of addins. What you are looking for exactly?
my email: [email protected]

Bye.

[Maroslav4]

Hi,

i have also many experience with Alphacam VBA. Im not sure what exactly you want create.

Here you have some sample macro for Alphacam which i created now. Only unzipp and copy to a C:\Alphacam\LICOMDIR\VBMacros\Startup

https://www.dropbox.com/s/b5m3w0eeb2...MACRO.zip?dl=0

Here is the video how you can active and use this.

https://www.dropbox.com/s/nogw3h1i6q...Macro.wmv?dl=0

[gushogan]

Hi Maroslav4,

Just wondering if you can help with a VBA and alphacam macro.
Is it possible to create a separate form with buttons to link to the solid simulation with in Alpha cam. So that I could pause, play and stop the simulation with a form/ addin?

Thanks

Fergus