So I'm retrofitting my Mori SL1 Lathe. Most of the work is done. Wasn't too difficult. I was lucky in that when I bought the lathe a month or so ago it was scheduled to be housed in Mori's actual show room. What that means is that it was repainted pretty well.
I didn't use any of the old electronics and I removed the old cabinets from the back. What that means is that it takes up a lot less room. I will have to cut a small hole in my divider wall for the X servo.
Using Pokeys 57E and M16 BOB and Mach3. Using DMM Servos 1.8Kw. Made steel adapter plates for the servos.