[hods1222]

Hey all you Tree gurus. I have a Journeyman 425 that has the dynapath delta 20 on it. Everything seems to run just fine but I can't seem to get the rs232 port running. I plugged in an rs232 tester(in line light up tester) and got the result in the picture as I attempted to load a program. If I unplug the tester from the machine, pin 2 flashes and seems to be transferring data from the computer. Am I hosed when it comes to program transfer?Attachment 346444

Sent from my SM-G935T using Tapatalk

[underthetire]

No, tree had the com port different. Normally you would have pin 2 and 3 crossed, well tree decided to use 2 to 2 and 3 to 3.

Sent from my SM-T813 using Tapatalk

[hods1222]

Is it normal for it to light up immediately upon connection to the control?

Sent from my SM-G935T using Tapatalk

[hods1222]

For anyone that was having problems with their rs-232 and no wiring seemed to fix it, I fixed mine by replacing the aux board. I called dynapath and they told me that it was common for the line drivers and receivers get wiped out on the board. Just trying to pay it forward.

Sent from my SM-G935T using Tapatalk