[simplyvishal]

Hi
I need Original Parameters, maintenance, electrical and programing manuals for Hardinge Cobra 42 with Fanuc 21TB. Pls Help cnc zone community. Pls send it on following email :

[email protected]

Thanking You,

Vishal Vaishnav

[mbservice]

Emailed you

[GPena]

Hi rkservice, do you have the manuals for this machine? We also need them. Please let me know to: [email protected]

Thank you.

[mbservice]

Hi rkservice, do you have the manuals for this machine? We also need them. Please let me know to: [email protected]

Thank you.

I've emailed you

[mrafitraders]

Greetings, I trust you are well. Can you please email me Hardinge Cobra-42 fanuc 21T Electrical manual please? [email protected]

[Evolution]

Hi every buddy !! After a shut down we restart the lathe and the plc has zero parameter and a black screen !!??

I really need Original Parameters for the Hardinge Cobra 42 with Fanuc 21TB . Pls Help cnc zone community. Pls send it on following email :

[email protected]

Thanking You,

Fred

[mbservice]

Hi every buddy !! After a shut down we restart the lathe and the plc has zero parameter and a black screen !!??

I really need Original Parameters for the Hardinge Cobra 42 with Fanuc 21TB . Pls Help cnc zone community. Pls send it on following email :

[email protected]

Thanking You,

Fred

I will see if I have a set

[Evolution]

Thank you !!

[mbservice]

Sorry I have none

[Evolution]

Hello community , i have a Hardinge Cobra 42 1996 with a Fanuc 21T . I have a problem with mine the eprom have erase and now i have a black screen , the only thing a can do is see the system menu by holding the two arrow key bellow the screen while turning control on . With a PCMCIA card adapter and compact flash i can reflash the PLC control if i have the files back up . You would be very kind if you do a back up of your machine for me and for you so this big problem don't come back .

I am really searching for help !
Best regards
Fred

[Dsenterfitt]

I have a Hardinge cobra 42 that my magnatek gpd505 drive took a dump on me. I bought a Yaskawa A1000 drive for it but the parameters in the drive isn't right. Does anyone have the old parameters for the gpd505 or the new settings for the A1000 drive? Any help would be greatly appreciated. Because as of right now I'm down and losing money

[bilal7619344]

Dear Community,
I bought a Cobra 42 with 21I-TA, I lost parameters of that due to battery fail. Could you please help me? I am in big trouble now.
Email: [email protected]

[bilal7619344]

Dear Sir,
I bought a Cobra 42 with 21I-TA, I lost parameters of that due to battery fail. Could you please help me?
Email: [email protected]
waiting

[bilal7619344]

Dear Sir,
I bought a Cobra 42 with 21I-TA, I lost parameters of that due to battery fail. Could you please help me?
Email: [email protected]

[sting007]

Emailed you

Hi Dear,
could you please send me a copy
[email protected]

[APLCCV]

Hello, I bought a Hardinge Cobra 42, but I have no documents, operator manual, programming, electrical diagram.

Thank you all, if someone can email me, [email protected]