Re: Syntec RPM problem
Originally Posted by
oscarsodergren
Hi all!
I'm having trouble with the spindle rpm on a new syntec 6ma. I can't get get the actual speed to go any higher than 2000
rpm even if I've set the speed to 14000 rpm. Does anyone know what the problem could be?
Thanks,
Oscar
What does parameter 1671 say. I believe it 0 to 10v on the controller so it should be 1/10th of your max rpm. Also 1801 should be at max speed of spindle.
Rem password is 520 to change.
Sent from my LG-D852 using Tapatalk
In case anyone is wondering, I'm the twin of the other gfacer on cnczone...