584,826 active members*
5,275 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2010
    Posts
    39

    Mazak post for mill turn

    I am either purchasing a Mazak sqt15ms with c axis and subspindle with t-32-3 control does not have EIA enabled or an Integrex with tplus control, EIA option enabled, c and y axis / tailstock. I currently use Inventor with HSM. The only other CNC machine I have at the moment is a Milltronics VM17. I am trying to figure out the best method or getting a post for one of these machines.

    I like the Integrex but I am worried it is to much of a machine for me to start out on. I only have manual lathe experience and only about 6 months of cnc on the mill.

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Mazak post for mill turn

    I would contact HSM support at AutoDesk, they are normally very responsive in helping and creating post processors for various machines.

  3. #3
    Join Date
    Nov 2010
    Posts
    39
    Quote Originally Posted by Jim Dawson View Post
    I would contact HSM support at AutoDesk, they are normally very responsive in helping and creating post processors for various machines.
    I ended up getting a sqt18m with t plus control. I have emailed autodesk but they did not have one. They did mention someone was working on a post at one point.

  4. #4
    Join Date
    Mar 2014
    Posts
    44

    Re: Mazak post for mill turn

    We created a postprocessor for the Integrex that runs very nice, but as I read, that too late now. Good luck with your new machine.



Similar Threads

  1. Postprocesor for mazak integrex turn mill
    By zarif in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 1
    Last Post: 05-05-2017, 04:20 AM
  2. Replies: 0
    Last Post: 04-01-2016, 07:52 PM
  3. Replies: 1
    Last Post: 04-14-2014, 07:49 PM
  4. Turn/mill between spindles Mazak i-200S Matrix II
    By chartwar02 in forum G-Code Programing
    Replies: 0
    Last Post: 02-28-2014, 02:05 PM
  5. turn on part counter in eia on MAZAK nexus vertical mill
    By Denis13 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 01-31-2008, 03:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •