Hello
i have a Problem with my BMC 40 .The Hard drive is defect.
I format a new Hard drive Seagate 400mb.
c: executive_1 d: Part_progs .
all Formate and make a bootsector and Execprog .
All works fine .
Now the Problem is when we Power on the Maschine the Hard drive works . "Loading Executie"
and then it shows after 30 seconds.
"Base Memory fault- Less then 640kb"
We tested it with 3 Pair REM but all the same.
CMOS battery is ok.
Did anyone have an Idear.
Thanks