I am a long time builder/commenter and now nearing the end of the journey.
Here are a couple pics of the mostly built project -- bone stock pretty much.

Attachment 348412

Attachment 348414

I am going through the alignments now and fabricated a wrench for the thin-head bolts.
The source was a tool from a Harbor Freight auto trim kit. I took my Dremel to it and made the 1/2 spacing needed.

Attachment 348416

Attachment 348418

The height above epoxy floor adjustments were made much easier by fabricating a gadget using a digital indicator I had on hand.

Attachment 348420

The PC is all built up with EMC (or whatever it is called now) and I have some cosmetic work left on the cover to do.
The project has been quite the experience and I am looking forward to cutting aircraft parts before Spring.

-=Doug