585,705 active members*
3,920 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Controller & Computer Solutions > How to active the datum table or preset table in Heidenhain TNC 426 control!

Thread: How to active the datum table or preset table in Heidenhain TNC 426 control!

Results 1 to 3 of 3
  1. 02-02-2017, 02:22 AM #1
    diendan179
    diendan179 is offline Junior Member
    Join Date
    Feb 2014
    Posts
    5

    How to active the datum table or preset table in Heidenhain TNC 426 control!

    I have spent all day to find the datum table or preset table in my control, but i did not find it. does anyone know how to find it? i am not sure my control has the table or not. i can setup the datum of the part using Datum Set when i change the control to Manual mode, but i want to see the table with the list of datum numbers. thank you so much!
    Reply With Quote Reply With Quote
  2. 02-05-2017, 12:07 AM #2
    csg67
    csg67 is offline Registered
    Join Date
    Dec 2011
    Posts
    99

    Re: How to active the datum table or preset table in Heidenhain TNC 426 control!

    1, for example, create a file NULLPNT.D
    2, select the file in automatic mode (and simulation)
    3, the [DATUM TABLE] function key is displayed (in MDI and AUTO mode)
    Reply With Quote Reply With Quote
  3. 03-15-2017, 02:39 PM #3
    diendan179
    diendan179 is offline Junior Member
    Join Date
    Feb 2014
    Posts
    5

    Re: How to active the datum table or preset table in Heidenhain TNC 426 control!

    thank you for the help. i am really appreciate it! i have created the file and it worked good. thank you
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Heidenhain iTNC530 Datum Manager??
    By xray34 in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 10-13-2014, 10:01 PM
  2. iTNC 530 preset table
    By pinguS in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 01-02-2013, 04:43 PM
  3. Help Needed with G53 Datum Shift on Heidenhain 426
    By SolidCAM_13 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 03-11-2011, 07:49 PM
  4. How to activate Setup Datum on Heidenhain controller
    By kiemkhach in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 6
    Last Post: 07-31-2010, 05:32 AM
  5. Heidenhain TNC 426 - rotary table problem
    By nbjs in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 8
    Last Post: 12-05-2006, 04:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules