509,646 active members
3,531 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2016
    Posts
    5

    V carve pro 8.5

    Hi I am using the Vectric V Carve Pro 8.5 software on my CNC. Is it possible to use the quick engrave feature with both outline and fill feature on one project?Example: I want to make a sign with Welcome centered in the middle and sunflowers at each end. I want to use the quick engrave fill on the welcome and outline on the lighthouses. Can I do that? I have tried but haven't been able to.
    Thanks
    Ray

  2. #2
    Junior Member
    Join Date
    Feb 2019
    Posts
    2

Similar Threads

  1. V-Carve Pro V8.0
    By DBMacKay in forum Vectric
    Replies: 4
    Last Post: 08-19-2015, 09:18 PM
  2. First V Carve
    By Gallchobhair in forum BobCad-Cam
    Replies: 5
    Last Post: 08-07-2014, 09:00 PM
  3. V-Carve
    By ind_dsnr in forum BobCad-Cam
    Replies: 5
    Last Post: 07-01-2010, 05:08 PM
  4. v-carve
    By Claude Boudreau in forum BobCad-Cam
    Replies: 4
    Last Post: 03-30-2010, 03:13 PM
  5. V Carve
    By tangocc35 in forum Joes CNC Model 2006
    Replies: 4
    Last Post: 10-17-2007, 09:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •