Hi I am using V Carve Pro 8.5 on my CNC. Is it possible to use the quick engrave feature with both outline and fill feature on one project?Example: I want to make a sign with Welcome centered in the middle and sunflowers at each end. I want to use the quick engrave fill on the welcome and outline on the lighthouses. Can I do that? I have tried but haven't been able to.
Thanks
Ray
Thread: V Carve pro 8.5
Results 1 to 2 of 2
-
02-02-2017, 03:24 PM #1
Registered
- Join Date
- Aug 2016
- Posts
- 5
V Carve pro 8.5
-
02-02-2017, 04:53 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: V Carve pro 8.5
Just do two different operations, and select only the vectors you want for each one. Don't try to do it all in one operation.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
v-carve
By seans52 in forum Post ProcessorsReplies: 1Last Post: 10-08-2013, 06:57 PM -
V carve
By BOBINETTE in forum MetalWork DiscussionReplies: 0Last Post: 06-07-2013, 05:14 AM -
V-Carve
By ind_dsnr in forum BobCad-CamReplies: 5Last Post: 07-01-2010, 05:08 PM -
v-carve
By Claude Boudreau in forum BobCad-CamReplies: 4Last Post: 03-30-2010, 03:13 PM -
V Carve
By tangocc35 in forum Joes CNC Model 2006Replies: 4Last Post: 10-17-2007, 09:18 PM
Tags for this Thread
Posting Permissions
