Greetings. This is my first post to the forum. Kind of a newbee to building the cnc stuff. I got my hands on an eagle plas system cheap and have built a new table and gantry for the hardware I have added a second motor for the x axis. I would like a few suggestions for a 4 axis breakout board so I can slave the x drives. Thank you for your time.
Thread: 4 axis breakout board
Results 1 to 2 of 2
-
02-03-2017, 12:37 PM #1
Registered
- Join Date
- Jun 2016
- Posts
- 4
4 axis breakout board
-
02-03-2017, 12:39 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: 4 axis breakout board
Most breakout boards can handle 4 axis, even the $5 ones from Ebay.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
6 axis breakout board
By 2e0poz in forum Stepper Motors / DrivesReplies: 20Last Post: 03-07-2019, 10:47 AM -
Shematic for 5 axis breakout board
By privatecnc in forum CNC Machine Related ElectronicsReplies: 2Last Post: 07-14-2014, 08:40 PM -
5 axis breakout board problems here
By bee2323 in forum CNC Machine Related ElectronicsReplies: 0Last Post: 01-19-2014, 12:52 PM -
5 axis breakout board and 3 single axis drivers tb6560, not working
By MROX15 in forum Stepper Motors / DrivesReplies: 2Last Post: 11-06-2013, 07:34 PM -
4 Axis Breakout Board Help
By PurduePete in forum CNC Machine Related ElectronicsReplies: 2Last Post: 08-24-2012, 05:17 PM
Tags for this Thread
Posting Permissions
